How does it work?
BEADLOCK creates a hard sacrificial barrier on your wheels and suspension which shields the abuse coming from brake dust, dirt and UV rays.
BEADLOCK contains SiO2 (silica dioxide) which is the primary component of glass and is what gives glass strength and hardness, but unlike glass we have blended in a proprietary formulation of elastic polymers, which allow the microscopic surface to flex. With this blended SiO2 chemistry BEADLOCK provides a far more durable and hydrophobic layer than any wax or sealant because it cures as a hardened layer of protection while maintaining the ability to absorb impacts and flex with the surface it’s applied to.
This easy-to-apply coating is specifically designed to protect your wheels and suspension components from the unique conditions they see both on and off-road. Whether you simply cruise the pavement or get down in the dirt BEADLOCK coating can take the abuse. Safe for all finishes including raw metals, chrome, powder coat, anodized and painted surfaces.
The big question…How long does it last?
BEADLOCK should easily last a year with proper maintenance. Most wheel coatings make exaggerated claims they last for years and they fall short. We’ve seen this happen with ones tested at our shop. We’d rather give you a conservative durability time frame and educate you on how to properly maintain the wheels after applying so you get the most out of the products potential. Now, if you neglect your wheels after applying by cleaning them with cheap wheel cleaners or degreasers – you’re gonna shorten the life span of the coating. If you clean them properly with Shift Soap, Cool Guy wheel cleaner (only when needed) and keep them boosted with Punch-It synergy spray – you will benefit from the maximum life span of the coating. Lastly, the longevity of BEADLOCK depends on the environmental conditions the wheels are exposed to. If your wheels go through a harsh winter with snow and salted roads, you should re-apply BEADLOCK once spring rolls around. If you experience normal driving conditions like occasional rain and hard pavement, you’re only dealing with road grime and brake dust – make it something you re-apply annually.
Kit Includes:
- (1) 80 ml Beadlock bottle
- (1) 4 oz Throwback prep cleaner
- (1) 4 oz Punch-It after care maintenance
- (1) coating applicator pad
- (1) coating leveling microfiber towel
- (2) black coating sprayers (one spare sprayer)
- (1) pair blue gloves
- Complete instructions and pro tips insert card
Maintenance:
After BEADLOCK has been applied to the surface there’s really no need to use our Cool Guy wheel cleaner unless you have neglected the wheel for a few weeks and the brake dust has built up. Make up a bucket of our SHIFT soap and water to clean the coated surfaces. Always use a soft wash mitt to ensure safe cleaning.
After each cleaning, apply PUNCH-IT synergy spray to maintain the layer of BEADLOCK. This keep the coated surface slick and hydrophobic.